# Pydio.rest.auth not starting

**URL:** <https://forum.pydio.com/t/pydio-rest-auth-not-starting/3459>\
**Category:** Pydio 8\
**Tags:** linux\
**Created:** [September 4, 2020, 7:40am UTC](https://forum.pydio.com/t/pydio-rest-auth-not-starting/3459 "2020-09-04T07:40:10Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![DaSouli](https://avatars.discourse-cdn.com/v4/letter/d/f6c823/32.png) [@DaSouli](https://forum.pydio.com/u/DaSouli)\
**Post date:** [September 4, 2020, 7:40am UTC](https://forum.pydio.com/t/pydio-rest-auth-not-starting/3459/1 "2020-09-04T07:40:10Z")

</div>

Hi everyone,

i have cells running on a Debian GNU/Linux 9 and now after upgrading to 2.1.4, some services won’t start any more.  
pydio.rest.auth  
pydio.rest.mailer  
pydio.grpc.mailer

The only error entry i can found in the logs is:  
{“level”:“error”,“ts”:“2020-09-03T13:50:31+02:00”,“logger”:“pydio.rest.auth”,“msg”:"Could not prepare start ",“error”:“timeout”}

Anyone has an idea how i can solve this?

---

<div class="post-metadata">

**Author:** ![zayn](https://avatars.discourse-cdn.com/v4/letter/z/a87d85/32.png) [@zayn](https://forum.pydio.com/u/zayn)\
**Post date:** [September 7, 2020, 8:30am UTC](https://forum.pydio.com/t/pydio-rest-auth-not-starting/3459/2 "2020-09-07T08:30:55Z")

</div>

Hello, @DaSouli,

Could you tell me if you are using port 80 or 443 with your Cells; if that is the case did you make sure to setcap your binary `sudo setcap 'cap_net_bind_service=+ep' cells`.

If you are running Cells with a systemd service, could you “stop” and “start” the service instead of the “restart” directive.

---

<div class="post-metadata">

**Author:** ![DaSouli](https://avatars.discourse-cdn.com/v4/letter/d/f6c823/32.png) [@DaSouli](https://forum.pydio.com/u/DaSouli)\
**Post date:** [September 8, 2020, 7:23am UTC](https://forum.pydio.com/t/pydio-rest-auth-not-starting/3459/3 "2020-09-08T07:23:52Z")

</div>

hi @zayn

i use port 443, i also used setcap. cells is running in a screen session, so i just start and stop it as needed.

---

<div class="post-metadata">

**Author:** ![zayn](https://avatars.discourse-cdn.com/v4/letter/z/a87d85/32.png) [@zayn](https://forum.pydio.com/u/zayn)\
**Post date:** [September 15, 2020, 9:35am UTC](https://forum.pydio.com/t/pydio-rest-auth-not-starting/3459/4 "2020-09-15T09:35:19Z")

</div>

Hello @DaSouli,

Could you provide me the specs of your server?

By the way would you mind running `ps aux | grep pydio.rest.auth` and see if you can see the service in the list.